Puerta para calentador de agua Dometic de 10 galones

What does this door fit?

This collection covers replacement access doors for the Dometic 10 gallon RV water heater, including the Atwood-era GC10A and GCH10A series that Dometic now supports. Confirm your existing door's cutout dimensions (roughly 15-7/16" x 15-7/16" for the standard 10 gallon frame) and the model number on your heater's data plate before ordering. For the heater itself and related components, see our 10 gallon RV water heater collection.

What colors and finishes are available?

Dometic 10 gallon water heater doors are typically offered in polar white and colonial white to match common RV exterior panels. Hold the new door against your sidewall in daylight before installation, since faded factory paint rarely matches a fresh door exactly. Touch-up paint from your RV manufacturer is the cleanest fix if the contrast bothers you.

¿Tienen puerta para boiler de 10 galones?

Sí. Esta colección incluye puertas de repuesto para el calentador de agua Dometic de 10 galones (boiler), compatibles con los modelos GC10A y GCH10A. Verifique el número de modelo en la placa del calentador antes de ordenar. Si necesita ayuda con la compatibilidad, llame o envíe un mensaje de texto al 817-984-1852.

How do I install the replacement door?

The door mounts to the existing flange with the supplied screws and a new foam gasket around the perimeter. Remove the old door, clean the flange of any old sealant or gasket residue, set the new gasket, and drive the screws snug without overtightening (the plastic frame will crack if you crank down on them). Plan on 15-20 minutes. While you have the bay open, it is a good time to check the anode rod and inspect for hard water deposits before winter; our RV winterizing kits cover the rest of the seasonal water system.