What type of RV TV antenna should I choose for over-the-air channels?

Two formats dominate this collection: omnidirectional batwing-style antennas that pull signal from all directions without aiming, and directional crank-up antennas that you raise and rotate for stronger reception in fringe areas. Crank-up models like the Winegard Sensar series are the standard upgrade path for older campers because the roof mount and 12V wiring already match. Confirm your existing base plate dimensions before ordering so the new head attaches without drilling new holes. For broader 12V accessory pairing, see our RV electronics collection.

Can I get WiFi and TV reception from a single rooftop antenna?

Yes. Several combination units in this collection pair an over-the-air TV antenna with a long-range WiFi extender in one housing, so you only cut one roof penetration and run one coax/Ethernet bundle. The WiFi side typically connects to a campground or hotspot signal up to a mile out and rebroadcasts it inside the rig through a router. Check the input voltage (most run on 12V DC) and confirm your converter has a free circuit. The RV plug adapters collection covers shore power conversion if you plan to run the router off AC.

What is an in-motion satellite system and do I need one?

In-motion satellite antennas track the satellite signal while the RV is moving, so passengers can keep watching TV or stay online during travel days. Stationary (park-and-aim) systems are less expensive and work well for full-timers and weekenders who set up at a site for several days. If you tow a fifth wheel or travel trailer, a stationary dome is usually the practical choice since the tow vehicle handles drive-time entertainment. Confirm the dish you choose matches your service provider (DISH, DIRECTV, or Bell) before ordering.

How do I replace a broken antenna crank handle?

The crank handle is the most common failure point on a Winegard Sensar batwing antenna because the plastic gears strip after years of use. Replacement crank kits in this collection include the handle, shaft, and gear assembly, and the swap takes about 15 minutes with a Phillips screwdriver. Verify the model stamped on your existing ceiling plate (Sensar II, III, IV, or Pro) before ordering, as the gear pitch is not interchangeable across generations.

Does United RV Parts offer free shipping on communication equipment?

Orders over $100 ship free within the contiguous US. Larger satellite domes and bundled kits may ship via standard ground freight; the shipping method is listed on each product page. If you need help confirming compatibility with your existing roof mount or coax routing, text or call our team at 817-984-1852 before you order.