Calentador de agua para RV de 10 galones

7 productos

How much hot water does a 10 gallon RV water heater provide?

A 10 gallon RV water heater holds 10 gallons of hot water, about 67% more than a standard 6 gallon tank. In practice that usually means back-to-back showers or a shower plus dishes before the tank needs to recover. Usable hot water depends on your thermostat setting and how much cold water you mix in at the tap.

What is the difference between a 10 gallon gas water heater and a gas/electric model?

A gas-only 10 gallon water heater heats with LP and needs 12V DC to run its ignition and controls. A gas/electric model, such as the Suburban SW10DE, has a 12,000 BTU LP burner plus a 1440W electric element that runs on 120V shore power or a generator. You can use either heat source, or both together for faster recovery. If you choose a gas/electric unit, a Southwire Surge Guard RV surge protector helps protect the element and control board from campground voltage problems.

Can I replace my 6 gallon RV water heater with a 10 gallon unit?

A 10 gallon tank is not a drop-in replacement for a 6 gallon unit. The 10 gallon tank is larger, so you will usually need to enlarge the sidewall opening, rework the plumbing, and fit a new door. If you need an exact-fit swap without cutting, our Dometic 6 gallon RV water heaters are the more direct route. Before ordering, measure your existing opening and note the model number on the data plate. You can also text or call 817-984-1852 to confirm fitment.

Does a 10 gallon RV hot water heater need an anode rod?

It depends on the tank material. Suburban 10 gallon water heaters use a porcelain-lined steel tank and need a magnesium anode rod to slow corrosion. Inspect the anode rod at least once a season and replace it when it is mostly consumed. Dometic (formerly Atwood) 10 gallon water heaters use an aluminum tank and do not use an anode rod. Check your brand before you buy replacement parts.

Why won't my 10 gallon propane water heater light even with full LP tanks?

Direct spark ignition (DSI) 10 gallon propane water heaters rely on steady 12V DC power. If the voltage at the control board drops too low, the unit can fail to ignite and lock out. A weak battery or a failing converter is a common cause. If your converter is the problem, a replacement from our 55 amp RV power converters can restore stable 12V supply. Also check the fuse, the ground connections, and the electrode gap before replacing the water heater itself.