Furrion Chill R32 Ceiling Assembly for Multi Zone Installations

What is the Furrion Chill R32 Ceiling Assembly for Multi Zone installations?

This is the indoor ceiling-mounted component that pairs with a Furrion Chill R32 rooftop air conditioner in a multi zone setup, where two or more AC units are controlled together through a central thermostat system. The ceiling assembly handles air distribution and houses the controls inside the coach, while the rooftop unit does the cooling work. Multi zone wiring lets each unit run independently based on zone demand, which is the standard configuration on larger fifth wheels and Class A coaches with front and rear AC units.

How do I know if I need a multi zone ceiling assembly or a standard one?

If your RV has more than one rooftop air conditioner controlled by a single wall thermostat, you need the multi zone version. If you only have one AC unit with controls built into the ceiling assembly itself, you need a non-ducted or ducted single zone assembly instead. Check your existing thermostat and wiring before ordering. For single zone Furrion setups, see our Furrion Original Ceiling Assembly for Non-Ducted Installations collection.

Is this assembly ducted or non-ducted?

The Furrion Chill R32 multi zone ceiling assembly is designed for non-ducted installations, meaning air discharges directly through louvers in the assembly into the living space rather than through ductwork in the ceiling. If your coach uses overhead ducting to distribute air to multiple vents, you will need a ducted ceiling assembly instead. For ducted setups on other brands, see the Coleman Power Saver HP Ceiling Assembly for Ducted Installations.

What refrigerant does this assembly work with?

This ceiling assembly is built for Furrion Chill rooftop units running R32 refrigerant, the current standard replacing R410A in newer RV air conditioners. R32 has a lower global warming potential and slightly higher cooling efficiency per amp. Confirm your rooftop unit is an R32 model before ordering. If you also need a soft start to reduce inrush current on your AC, our Coleman RV Air Conditioner Soft Start collection covers compatible kits.

How is the multi zone ceiling assembly installed?

Installation involves mounting the assembly to the existing 14 x 14 inch ceiling opening, connecting the multi zone control wiring to the central thermostat, and joining it to the rooftop unit through the roof gasket. The roof gasket must seat evenly to prevent leaks, and the mounting bolts should be torqued in sequence to the spec listed in the Furrion install manual. If you are not confident with the wiring side, this is a job worth handing to a mobile RV tech. Text or call us at 817-984-1852 to confirm fitment before ordering.