PullRite | 25K Super 5th Wheel Hitch | OE Puck Series | 1400 | Long Bed Trucks | Ford

The #1400 OE Puck Series Super 5th carries a heavier maximum tow rating of 25K!  Designed specifically for Ford long bed trucks with pucks, but usable
with short bed trucks with the right truck/trailer combination for
those who don't mind making a larger turning radius to avoid cab contact.  But if you want a true solution to short bed cab clearance limitations, check out SuperGlide for a fully automatic, sliding hitch!

This direct attachment hitch mounts to your truck's OE mounting points...NO ADAPTER OR RAILS NEEDED!  

The
mounting post assemblies are completely removable for easier removal
and installation of the hitch.  Simply unpin handles, rotate 1/4 turn
outward and lift the hitch out of the bed. NO TOOLS NEEDED!  The #1400
is made from high quality American steel and premium hardware, like the
use of castle nuts that allow for finer adjustments of the OE puck
handles for ease of installation and fit!

The
hitch plate is the first connection to your trailer.  Ours have a fully
automatic locking jaw, is the only self-locking handle on the market
and has no secondary locking devices to engage.  Its dual articulating
hitch head moves side-to-side and front-to-back, giving you a smoother
ride as you travel over bumpy roads.  Even more important, PullRite's
hitch plate allows you to couple/uncouple your trailer on uneven ground,
whereas most other brand of hitches require you to jack up/shim your
truck and trailer to be level with one another to prevent a false hookup
or "high hooking."  And removing PullRite's automatically-locking hitch
plate is done by pulling two pins and clips, unlike other hitches on
the market that require tools for removal.

All PullRite products are SAE J2638 tested.

• 25,000 lbs. max gross trailer weight towing capacity
• 6,250 lbs. max trailer pin weight capacity
• Vertical height adjustment from 15" to 18"
• Direct mount fifth wheel hitch for trucks with OE puck mounting points
• Dual articulating head moves four directions for easier hookup on uneven ground and a smoother ride
• Hitch head easily removable with pins and clips...no tools needed
• Locking jaw closes automatically around king pin
• Latch handle locks automatically when jaws are engaged
• No secondary locking devices to engage means no reaching over high-sided truck beds to get dirty
• Extended handle keeps you out of the bed
• Precision, laser cut jaw components cradle the trailer's king pin 140º for a secure, tight fit
• Tight fitting parts give you the best ride possible
• Hitch comes fully assembled
• SAE J2638 tested
• Made in the USA
• Notes/Limitations

A
towing system includes each vehicle and component involved in towing.
Each item in your towing system has a capacity or weight rating.  You
trailer has a Gross Vehicle Weight Rating, or GVWR.  Your truck has a
tow capacity, payload capacity, and possibly more. In addition, your
fifth wheel hitch has a weight rating.  This weight rating must be at,
or above, the GVWR of your trailer for you to tow safely.  In addition,
if your truck can tow larger loads (has a larger capacity) than the
rating of your hitch, your system is only safe to tow loads at the lower
rating, that of the hitch.

Your
mounting kit also has a weight rating, just like your fifth wheel
hitch. Many times, these rating are designed to match. But, this is not
always the case. Your mounting kit may be higher rated then your fifth
wheel hitch, but it also could be lower depending on the components
involved.  The lowest rating of any one component in the system becomes
the rating of the entire system. If your mounting kit is rated to 18,000
lbs., and your hitch is rated at 24,000 lbs., the weight rating of the
entire system will not be above 18,000 lbs.  Other components in the
system could lower the actual system rating further.

It
is the end users responsibility to ensure a safe towing experience. To
this end, it is your responsibility to ensure that the truck, trailer,
hitching components, and all other items involved are rated or have a
capacity sufficient for the loads involved.